TD1200 Dust Collector

Specification - TD1200
Model: TD1200
Capacity: 1200cfm*
Total Emission to Atmosphere: <10mg/mâ³>
Filters: Pleated Spun Bonded Polyester Needlefelt
Expected Filter Life: In excess of 4 Years (under normal operating conditions)
Filter Cleaning: Reverse Jet Pulse (Venturi Assisted)
Control System: Differential Pressure Monitoring across filters with Pulse-On-Demand PLC (Pro Logic Controller)
Air Header: 200NB Schedule 40 Pipe (Pressure Vessel)
Cleaning Delivery: Pulse Diaphragm Valves
Electrical Supply: 24V DC
Compressed Air Consumption: Approx 480 l/min (Varies with dust loading)
Compressed Air Supply Pressure: 50psi
Optimum Fan Speed: 3150rpm
Hydraulic Motor Supply Flow Rate: 60 l/min
Dust Inlet Spigot/Ducting Hose Diameter: 6" diameter (152mm)
Hopper Discharge: Twin Self Purging Vacuum Socks

*Upgrade Kit Available: Collector can be Upgraded to 2000cfm

Progradex Sampling System

Features:

• 100% Recovery for sampling
• Multiple sample bites of both coarse and fine particulate taken randomly from all around and along the length of the interval providing vastly superior representivity.
• True 360 degree annular release of frilled ore over the sampling cutters.
• Approx 2.6m tall.
• Lightweight construction.
• Vastly larger apertures throughout.
• For wet and dry sampling with modes of operation to suit conditions.
• Blockage resistant internal surface treatments throughout.
• All access doors safety interlocked.
• Automatically samples on a continuous, regular sampling sequence as the interval does not need to be stored within the system prior to dumping.
• Continuous sampling provides a consistent, regular flow of ore to exit the system so operators can visibly monitor changing ground conditions as they occur.
• Percentage splits fully adjustable by the simple change of cutter blades.
• Multiple bag station carousel to vastly reduce operator input. Could remove as least one operator from the entire process.

Options:

• Any number of samples can be taken from an interval.
• Fully automatic self leveling capability.
• Moisture detection instrumentation to automatically change the operating mode of the system from dry mode to wet mode as conditions change without any operator input.
• Match the number of carousel stations to the number of intervals to be taken from a hold.
• Rig, Trailer, Skid or Truck mounting options.