Reference Material
TD1200 Dust Collector
Specification - TD1200
Model: TD1200
Capacity: 1200cfm*
Total Emission to Atmosphere: <10mg/mâ³>
Filters: Pleated Spun Bonded Polyester Needlefelt
Expected Filter Life: In excess of 4 Years (under normal operating conditions)
Filter Cleaning: Reverse Jet Pulse (Venturi Assisted)
Control System: Differential Pressure Monitoring across filters with Pulse-On-Demand PLC (Pro Logic Controller)
Air Header: 200NB Schedule 40 Pipe (Pressure Vessel)
Cleaning Delivery: Pulse Diaphragm Valves
Electrical Supply: 24V DC
Compressed Air Consumption: Approx 480 l/min (Varies with dust loading)
Compressed Air Supply Pressure: 50psi
Optimum Fan Speed: 3150rpm
Hydraulic Motor Supply Flow Rate: 60 l/min
Dust Inlet Spigot/Ducting Hose Diameter: 6" diameter (152mm)
Hopper Discharge: Twin Self Purging Vacuum Socks
*Upgrade Kit Available: Collector can be Upgraded to 2000cfm
Labels: progradex, sampleprep
AFX Fusion Systems
A robotic bead fusion system that has been scaled to meet the varying production demands of XRF laboratories.
The AFX4 system is based on the hugely successful 12 furnace fusion systems that, to date, have mass-produced millions of fused beads. This compact 4 furnace system better suits the requirements of the typical production laboratory.
It contains the same reliable components and the same proven methodology as the original high capacity systems that revolutionised large scale bead fusion preparation techniques. This technology is now accessible to a wider range of end users.
It is technology that distinctly surpasses any previous methodology and apparatus currently used in XRF laboratories around the world. It provides an efficient alternative from the low volume, manually demanding, batch processing methods currently adopted.
The AFX4 cell allows for manually filled crucibles to be introduced via a conveyor. The ADFX4 cell has the added benefit of automating the sample and flux dosing stage.
Linear Automation Systems
Essa’s linear automation systems link high capacity sample preparation equipment with proven mechanical sampling devices using reliable sample transfer mechanisms.
Simply load your dried field sample into a crusher and collect the assay portion and pulp residue at the other end.
Linear automation systems offer many of the benefits associated with more flexible robot-based automation cells but at a fraction of the cost.
Greater consistency, improved traceability, better hazard management and insulation from labour availability and cost fluctuations are benefits from automating sample preparation processes.
These systems are specifically designed for medium throughput mineral laboratory sample preparation requirements. They are ideal for processing mineral ores such as gold, nickel and iron ore.
They are well suited for use at remote mining and exploration sites and do not require skilled labour to operate.
Simply load your dried field sample into a crusher and collect the assay portion and pulp residue at the other end.
Linear automation systems offer many of the benefits associated with more flexible robot-based automation cells but at a fraction of the cost.
Greater consistency, improved traceability, better hazard management and insulation from labour availability and cost fluctuations are benefits from automating sample preparation processes.
These systems are specifically designed for medium throughput mineral laboratory sample preparation requirements. They are ideal for processing mineral ores such as gold, nickel and iron ore.
They are well suited for use at remote mining and exploration sites and do not require skilled labour to operate.
OEM Sample Preparation
Tungsten Carbide Pulverising Mill Bowl
Tungsten carbide is the grinding head of choice for many laboratories where elemental contamination is limited to just two principal contaminants: tungsten and cobalt.
With the Essa 125cc grinding head all surfaces in contact with the sample (bowl, ring, roller and lid) are machined from tungsten carbide. The bowl chamber and inner lid layer are encased in stainless steel to increase overall strength and to reduce material cost.
The bowl and lid incorporate ergonomically-designed lifting flanges to enable easier handling when processing samples.
Chemical Composition:
Cobalt (Co): 6.0% by weight
WC: balance
Work Benches & Trolleys
They are of fabricated steel and heavy duty sheet metal construction. All have a 5 mm thick steel bench top which is 900 mm from floor level, 750 mm deep and available in 1200, 1500, 1800, 2000, 2400 and 3000 mm lengths.
WORK STATIONS:
For sample preparation areas. Supplied with a zinc anneal sheet metal hood (as illustrated) and a below bench level full length dust duct along the back edge of the bench top. The entrance to the duct is covered with a heavy mesh screen at bench-top level.
WEIGH BENCHES:
Are essentially the same as a Work Station but with a solid bench top and vertical extraction point over the work area.
GENERAL PURPOSE WORK BENCHES:
Are essentially the same as the Work station but without a hood and with a solid bench top.
OPTIONS FOR ALL BENCHES INCLUDE:
5 mm thick rubber bonded to the working surface of the bench top, a heavy duty mesh shelf below the bench and over the bench lighting.
Ventilated Work Stations
They are of fabricated steel and heavy duty sheet metal construction. All have a 5 mm thick steel bench top which is 900 mm from floor level, 750 mm deep and available in 1200, 1500, 1800, 2000, 2400 and 3000 mm lengths.
WORK STATIONS:
For sample preparation areas. Supplied with a zinc anneal sheet metal hood (as illustrated) and a below bench level full length dust duct along the back edge of the bench top. The entrance to the duct is covered with a heavy mesh screen at bench-top level.
WEIGH BENCHES:
Are essentially the same as a Work Station but with a solid bench top and vertical extraction point over the work area.
GENERAL PURPOSE WORK BENCHES:
Are essentially the same as the Work station but without a hood and with a solid bench top.
OPTIONS FOR ALL BENCHES INCLUDE:
5 mm thick rubber bonded to the working surface of the bench top, a heavy duty mesh shelf below the bench and over the bench lighting.
WORK STATIONS:
For sample preparation areas. Supplied with a zinc anneal sheet metal hood (as illustrated) and a below bench level full length dust duct along the back edge of the bench top. The entrance to the duct is covered with a heavy mesh screen at bench-top level.
WEIGH BENCHES:
Are essentially the same as a Work Station but with a solid bench top and vertical extraction point over the work area.
GENERAL PURPOSE WORK BENCHES:
Are essentially the same as the Work station but without a hood and with a solid bench top.
OPTIONS FOR ALL BENCHES INCLUDE:
5 mm thick rubber bonded to the working surface of the bench top, a heavy duty mesh shelf below the bench and over the bench lighting.