Fusion Furnaces

25 Pot Fusion Furnace (gas)

Construction	Cabinet of 5mm steel sheet mounted on a fabricated steel stand.
Refractory lining	Hot face of 70% alumina fire-brick backed with insulating fire-brick.
Internal dimensions	600mm wide x 680mm deep x 400mm high
Burner equipment and ratings	LPG: 1 x 40mm long pattern aspirator with flame retention nozzle. Burner rating 270MJ/hr @ 140 K.P.A Gas consumption 10.3 litres/hr for heat up: 6 litres/hr at operating temperature. Natural gas: 1 off gas package burner rated @ 270MJ/hr @ 3 K.P.A
Flame supervision	Landis & gyr LGB 41 flame controller and U.V. cell
Door operation	Pneumatic rising operation by foot control
Temperature control	Electric, auto control 1200oC K Thermocouple
Electrical requirements	The furnace is fitted with a 10 ampere single phase cord and plug top. Electrical load 2 amperes.
Approx. overall dimensions with door open	1460mm wide x 1430mm deep x 1980mm high

50 Pot Fusion Furnace (gas)

Construction	Cabinet of 5mm steel sheet mounted on a fabricated steel stand.
Refractory lining	Hot face of 70% alumina fire-brick backed with insulating fire-brick.
Internal dimensions	1200mm wide x 680mm deep x 400mm high
Burner equipment and ratings	LPG: 2 x 40mm long pattern aspirators. Burner rating 520MJ/hr @ 140 K.P.A. Gas consumption 20.6 litres/hr for heat up: 12 litres/hr at operating temperature. Natural gas: 2 off gas package burner rated @ 360MJ/hr @ 1 K.P.A. (720 total)
Flame supervision	Landis & gyr LGB 41 flame controller and U.V. cell
Door operation	Pneumatic rising operation by foot control
Temperature control	Electric, auto control 1200oC K Thermocouple
Electrical requirements	The furnace is fitted with a 10 ampere single phase cord and plug top. Electrical load 4 amperes.
Approx. overall dimensions with door open	1790mm wide x 1455mm deep x 1960mm high

Diesel fuel and Electric fired models also available for all models.